Hello, I'm back :) I solved by myself in a really messy way, but now I have Object Dock working. I've still to see about the restore point, but unfortunately I think that problem is different and probably only casually present in the same moment than the OD crashed. <span style="font-family: arial,helvetica,sans-seri
[quote who="DrJBHL" reply="6" id="2919785"]I'd bet the problem lies with ie9 x64's crappy Java script/engine. ie9 x32's is quite the opposite. You have rolled it back, so not much else to do. You should be able to see whether your zoomer is enabled. If not, I'd check to see if you have the latest version of Java.[/quote] I cannot go back :( System Restore is not able to do. I only did an uninstall for IE 9 but this not solve the proble
Thanks for the reply, I was wrinting in the Microsoft technet and in the Seven forum :( If I open my OD settings, I can see as existing only a dokc (with 15 tabs) and that dock is without any applet or java or anything else. I cannot see (Or I'm not able to do [e digicons]:|[/e] ) if the zoomer is on, for sure in my other docks I had the zoomer on. I have now tried 2 different solution but without any positive result. The first way to solve I tried, it was the Syst
hi all I just installed with windows update IE9 on my PC with 7 x64. I'm using OD2 since was in beta with no problem and I have 4 different dock (with flyout, link, Weather and so on) and 1 tabbed dock (really big: 15 tabs). All perfectly working untill now. After the the restart by the OS for the IE 9 setup, the only tab working is the tabbed one. No idea about all the other. Do you know what I can try to do? Or the only way is to take the restore point and erase IE
Hello, I'm finally back :) OK, I've tried all, but at the end I can only tell you that if I don't start OD 2, my computer runs normally. I did a backup of my settings (i'm not totally sure about the real possibility to be able to reinstall my OD) with 4 file .ini: AppImages, CurrentTheme, CurrentTheme_backup, Settings). I have copied the whole folder ObjectDock Library too :) Now I would like to try to uninstall OD 2 and then reinstall it. Do you think th
Hi there After a few month I was using OD 2 and when finally, all my dock are as I wanted; OD - after a computer crash (maybe due at mailwasher program) after the startup, load itself without any of my docks but only with a little blue docks completely empty. I've tried to unload and reload 3 times, but without any success. What I have to do? Thanks for any help Lio I found this in Events lo
[quote who="Wizard1956" reply="8" id="2686183"]liosac, do you have Impulse installed? Is so, all you should need to do is logon to it using the same info used with your purchase. Then go to the My Software tab. OD 1.9 should be there for you to install. If not, try clicking on the blue button at top left, select preferences,then reset data. Then close and reopen Impulse and see if OD appears.[/quote] Thanks for the quick reply :) It's a really big mess :( I
[quote who="natas2" reply="1" id="2635140"]what version are you using? 1.9 or 2.0? If it's 1.9, go into that docks properties and select Size & Appearance. At the bottom where it says Entry Names, select Show below each entry from the dropdown. That will carry over to 2.0. So if you are using 2.0 and still have 1.9, unload 2.0, start 1.9, make the changes and then unload 1.9 and start 2.0. I'm not seeing the option in the 2.0 properties. Anyon
Sorry for my bad english.... I' ll try to expose my request (i think not only mine) 1) the flyout menu 2) the possibility to change the font dimension on tab's label 3) the possibility to switch from one tab to the other tab only with mouseover (it was so handy!) that's for the moment, but it's only a fiw that I've upgraded to the version 2 And please, don't forget the users of this program :) Thanks l
I've found this solution and it's working for me. 1) When an update is required, don't bother to update. (2) Close Impulse. (3) Run Impulse manually as administrator (4) Say "Yes, I really do want to run as administrator" (5) If need be, enter your registration details. (6) Auto-update will occur. (7) Repeat steps (2) - (6) if need be. (8) Run Impulse as your normal account (non-admin) (9) If it prompts for "credenti
Here you go, found in a 3d's forum: working for me 1) When an update is required, don't bother to update. (2) Close Impulse. (3) Run Impulse manually as administrator (4) Say "Yes, I really do want to run as administrator" (5) If need be, enter your registration details. (6) Auto-update will occur. (7) Repeat steps (2) - (6) if need be. (8) Run Impulse as your normal account (non-admin) (9) If it prompts for "credent
Same for me :(
Hi there, I own both ObjectDock 1.9 and the upgrade 2.0 too. I've installed the 2 version in my new re-format drive but I saw thec flyout menu are not yet in this version :( really bad. So searching online I've found out to get rid of this, but I cannot download the 1.9 version. When I try to download through Impulse, the program ask to be update for doing that (Impulse needs to be updated/restarted before applications can be installed or updated) . I try but every time same r
Hi Seabass, thanks for your reply. My ticket is [#JXS-893035]: Multiplicity PRO I'm still in big trouble and the situation is still the same: I cannot connect my Vista pc (primary pc now) with the secondary pc (ex primary) while I had the opposite situation, all it was OK. I've had some reply from Support (Mike / milksama [Stardock]) but his replies are completely useless. As you can see in the screenshots I have attached at the mails, all seems OK, but Multiplicity is DISCONNECT
Hi! I've reconfigured Multiplicity PRO from Primary at secondary machine and viceversa. The old primary runs Winxp update at today, the new primary (old secondary) runs Vista 64 update at today. Since yesterday With the old configuration, everything runs perfectly, but now the Vista PC (primary machine) see the secondary but cannot connect :( The firewall it's ok, the name and IP it's ok, the port is the right one (and before this change from primary and secondary all was OK),