1) I have an object desk subscription. 2) answers from both DesktopGPT and from ChatGPT informed me of the capability of adding this key. 3) if you are a community assistant, a simple answer to my question would have been appreciated. You folks aren't very nice.
I have an existing OpenAI subscription. Both DesktopGPT and ChatGPT tell me I can use DesktopGPT with my existing ChaptGPT subscription by entering my OpenAI secret key to DesktopGPT. I have the key, but I can NOT see any option to add it into DesktopGPT. The instructions offered by DesktopGPT do not appear in my settings menu choices. So, the question is, where to I enter that key into your app? How (where) do I enter my OpenAI key into DesktopGPT?
Yes, it is easy to point the problem at the end user...and I'd be happy to discover it on my end (beta tested for MS for 22 years back in the day) ... but I have 3 ACER ONE laptops 32-bit with Win10's latest updates (not insider builds): one 32Gb S1002, one 32Gb S1003, and one 64Gb S1003. Each one exhibits the same result I've been discussing and showing. We eliminated program contention, SFC problems, and DISM component store and image problems as you saw in my posts.
Yes, as I mentioned - the native windows menu is fine. Please realize, I don't have this on my laptop anymore. I've told you the complete story...if you can't fix the code, that's fine. I can't spend more time putting it on, taking it off, reinstalling and configuring start10, etc. Perhaps my little laptop is missing key software like it lacks the pyqt5 plugins, etc. Don't worry about it. But Stardock might want to advertise that it works on *most* windows 10 pla
The scaling was 100% (I resized the screen captures for better fit in these uploads). AND, yes I tried all the Start11 screen format options. This is a problem for all modes once Start11 is 'on' -- as soon as it is off the Windows default menu shows everything fine.
I pointed out in my original reported comments that the Acer One S1003 has a much small *subset* of the *SAME* programs that are on the Lenovo i9 laptop with Start11 working fine - in other words there is no software contention causing this problem ... I did your chore of doing the clean boot in a new user environment and here are screen captures to illustrate how once again Start11 will not function correctionally on that 32-bit Acer laptop. <img src="https://cdn.stardock.us/forums/1
I uninstalled, rebooted, reinstalled, and rebooted with the v. 1.25 beta version and here is the screen shot of the results. Showing the problem I detailed previously.
I saw that Start11, v. 1.24 is being advertised for win10 OS now. I bought a 5 device lic. for Start11, v. 1.24. I can't use it on my small laptop as it makes all the default windows apps become a solid brown square (with the program name underneath) such as calc, calendar, camera, store, photos, etc. Winver: Win10 v. 21H2, bld. 19044.1806 and a 32bit laptop. Background: Works fine on my Windows 10, Lenovo Yoga, 64Gig, i7, x64bit laptop, Winver: Wind
Same here - since an earlier beta release. I don't change the resolution...maybe some software virtualizes some window. But, too, on 2 occasions it was near the top of the monitor immediately after rebooting Win11. So, it's intermittent setback back failure.
Remember, the problem is intermittent. It may happen once every 2 days or more. Sometimes 2x in one day or even at first bootup. But I could not do my job if I ran a clean-boot mode every day until (or if) it happens again. That's a 'test' for a problem that is continual. This one is not. Clean boot? Yes, I'm sure that if I eliminated all other open programs and there are no services operating other than Stardock's your software would work 100% of the time. But...tha
I already did the purge/reboot and reinstall/reboot...before I posted the error.
Oops...I mean Stardock's "ObjectDesktop" (not 'ObjectDesk'). I don't own anything called ObjectDesk nor ObjectDock.... just your "Object Desktop" - I shouldn't have assumed you would think ObjectDesk was Stardock's "ObjectDesktop"... So, don't chalk the problem up to a program I don't own or run, please. My bad.
System: Gigabyte z390UD; i9 Kaby Lake; 32GBx36MHz jSkill RAM; NVidia RTX 2080 Super (NVidia drvr: Studio 512.96); Two Monitors: HP 32 QHD 2560x1440. OS: Windows 11 v. 21H2 build: 22000.708. But note: this problem has happened with earlier builds and with and without ObjectDesk [Edit correction: Stardock's "Object Desktop"] running. Most recently, (per the earlier picture - not running ObjectDesk [Edit correction: Stardock's "Object Desktop"] )...and it happened right afte
I've reported this in earlier versions. Still an annoyance. Sometimes the Start menu opens at the top (of Monitor1) of the screen using styles Win11 and modern. It opens at the bottom if the choice is Win7 or win10 (any subset). So, when it is at the top, like now, I click on configure...choose style options. The result is that 7 and 10 open at the bottom and modern and win11 style open at the top as in the picture. <img src="https://cdn.stardock.us/forums/16/58/165
That is a valid point. I've had previous programs for the Taskbar: TaskbarX, translucentTB, and DualWallpaper (if it does anything like that). They are not now running, however. And - keep in mind, too - these did not interfere with previous Start 11 menu versions. Including, the recent v. 1.22 which worked (I don't seem to have retained a v. 1.23 if that was a release). This just in: I did the purge.bat and also uninstalled translucentTB (it h
yes and yes. of course. I'll have to reinstall it again to check on the service. OK, reinstalled Start11 1.42. Services is 'on' and 'automatic.' Same non-show behavior. It is as if it is not installed at all.
Yes, the configuration menus all open. And the center/left task bar will switch the taskbar icons in real time during the configuration menu being open. All the pages and buttons are available and 'work'...but the only menu that pops up is the default win11 menu (regardless of configuring start11 to be win7, modern, etc. Also worth mentioning is that I uninstalled the previous version and its settings. Perhaps the folks who are having it work for them merely upgraded over
I have Win11 21H2 build .708. x64. I have installed, uninstalled, rebooted, rinsed and repeated. But Start 11 v. 1.24 Does not replace Win11 menu. No option for a start menu (centered) shows up with the start button, cnt+start, Windows button, cnt+Win, etc. It simply is not working on this machine. I have no taskbar software running to interfere with it. At a loss for more about this iteration of Start11.
Start11 beta 1.5-j134 (win11 ver: 21H2 bld. 22000.556) I am still seeing the same 'bug' that existed in some previous builds of Start11. After a few uses of Start11 it stops popping up near the lower part of the monitor and pops up near the top. . I don't know if it the interplay with some other program I a
Terrific I know we are all looking forward to it. Release date?
yes, of course
This is a bit hard to explain so hand in there. This is with Start11 set to show in the centered taskbar. Using Start 11 Modern Style or the Win11 style (maybe any choice) in Win 11 ver. 22000.282 x64...main button click once on the centered Start11 icon (I'm left handed) brings up the Start11 menu screen (good)...before it closed another main button click on the Start11 centered icon should close it...but it doesn't - instead it brings up the Win+X menu. Note: also an alt
Using DS11 ver. o.93 in Win11 build 22000.282. I'm running the following StarDock software: Deskscape 11 10.93, Start11 .91, and Fences 3.1.33 (since 4Alpha can't make snapshots), that all. I only use 2 monitor and am stretching an image that works fine with Win10 using Deskscape10 10.02. I'm not using any of the other fancy animations or switching or anything. DS11 .93 can't stay active with a minimal task if stretch
Sorry...I thought this was exactly the same issue...Deskscape 11 keeps closing after a minute or a few. What is different from this thread?
This is an interesting and relevant thread. The same thing happens to me with DS11 in Win11 build 22000.282. Running: Deskscape 11 10.93, Start11 .91, and Fences 3.1.33 (since 4Alpha can't make snapshots), that all. Followed all of the above except for the codecs. I only use 2 monitor stretching with an image that works fine on Win10 using Deskscape10 10.02. It appears that DS11 .93 still needs a bit of tweaking...it can't stay active with a