ms1958

Hello, Stardock is currently offering a 25% discount. Why isn't there a 25% discount on the lifetime version of Fences 5 for 5 users? ms1958

If I read that, I won't spend any money on the 5 version, if the problems with multi-monitor operation are not solved in 5 either. Especially not as a subscription version Greetings ms1958

wiel Probleme beim Multimonitorbetrieb in Fences 4 nicht gelöst wurden, soll ich Fences 5 Kaufen. Ich habe fences 4 als dauellizenz gekauft, aber seit 2 Jahren schreibe ich stardock, das Fences 4 im Multimonitorbetrieb nach einem Nvidiatreiberupdate die Fencesfenster von beiden Monitoren sich auf Monitor 1 wiederfinden. Das ist nervig. - Aber ich sehe nicht ein, für eine Fehlerbereinigung soviel an upgradegeld zu bezahlen. - Abo schon mal garnicht <p

I don't really see that. I have to point out that the errors in multi-monitor operation with fences 4.xx were never solved and that I have had these problems since I bought Fences 4.xx in 2022. - <span class="HwtZ

Hello Basj, OK, then I will try this beta. I once installed the Fences 5.04 trial. After an Nvidia update I also have the problem that all fences of monitor 1 and monitor 2 are

Hello, I could not become a beta tester for Fences 5.5 I have some problems with 4.22 in multi-monitor operations Manfred

So Fences 4.22 doesn't make me happy. After every update of the NVidia driver software my fences are messed up. (Multi-monitor operation) they are either all displayed on monitor 1, or monitors 1 and 2 are swapped. Even when I open Fences, Fences often opens in English even though German is set. - I have reported the problems several times, but nothing has changed. Stardock just can't get the problems solved. I was already thinking about buying fences 5.... But I also

@ reply#3: Thanks with Winkey + P is also not a solution for me. Then there is more confusion. - I have already set in the energy settings that the screen never goes off, because when I wake up my fences are no longer on the right monitor. <span class="r

@ reply#5: You see Language ... is not German. i make now the Troubleshootin procedere. i send debug.zip, username ms1958

Hello, After a long time I connected my 3rd monitor again. (All monitors via HDMI) This is only added temporarily when I need it. But only Fences 4.21 shows its old bugs again: Fences cannot remember which monitor its Fences windows are on. A restore from the snapshot brings nothing. I've already made sure there are no fence windows on the third monitor. Only on the 1st monitor and 2nd monitor As soon as I switch on the 3rd monitor, th

Hello Paul - thanks, i installed and restarted. first call : "C:\Program Files (x86)\Stardock\Fences\Fences.exe" /de-DE /FromDesktop: in German :-) <span class="ryNqv

I have the newest: Fences V4.10

Hello, Apart from the Fences having massive problems remembering the position of the Fences window in multi-monitor operation (another thread), Fences 4 also has a problem with the language. Stands for me on system language (de-DE) Sometimes the Fences settings window is shown in German, sometimes in English. But if I set the language to USER: de-DE, no Fences settings window is displayed anymore. Only when I delete the following in the registry: HKEY_

I always work on the same PC. Today I updated the NVIDIA driver, and there all fences from monitor 2 were overlaid on monitor 2 again. It's annoying to then move all fences back to monitor 2. After the driver update, I uploaded the RAR file again using the link above.

hello here is the link tinyurl.com/mrxeztfn

Hello, Since I couldn't adjust anything anymore, I completely uninstalled and reinstalled fences. Luckily, I was now able to restore the saved positions, and my Fenjces-serial was also accepted again. </

Good day, So Fences is annoying me every day now. Fences (4.1.0.6) does not remember the Fences window positions. (Multi-monitor operation with 2 or 3 monitors) the 3rd monitor is occasionally turned on. That's why I no longer have any Fences windows on the 3rd monitor. In windows (11) the monitor number is always the same. If Windows remembers the numbers, why not fences? either the fences of monitor 1 and 2 are swapped after booting, or

i have today update the nvidia Driver. - All Fences of the 3 Monitors changed to Monitor 1. :-((( Fences is Version 4.10 debug before Driverupdate: ==

Hello dear Stardock Service, i love fences I am using version 4.0.7.2. My OS is Windows 11 and I run Fences over 3 HD monitors in the resolution 1920x1080 side by side. What really annoys me is that fences often don't remember which monitor the fence windows are on. (Although the order of the monitors never changes under Windows) Sometimes all fences are all on the main monitor at once,

Hello Basj, no, I don't use such software. <span class="JLqJ4b ChM

Guten Tag, Leider haben diese Tipss gar nicht geholfen :-) Obwohl sich die Monitorreihenfolge nie ändert, von links nach rechts ( [2] links(Boot), [3] mitte , [1] rechts ) werden oft die Fences von Monitor 3 und 1 vertauscht. Es nützt auch nichts, die letzte Fences Sicherung zurück zu sichern. ich muss einige Fences-Sicherungen austesten, irgendeine sichert dann richtig zurück. Das Bild der Sicherung ist immer korrekt, nur da

Hi there, My English is not that good, so I'll try google translate :-). My problem: I have Fences 4 Beta in the current version, Windows 11 on the computer. Graphics card: Nvidia GTX 760 2GB (But I also have the problem under Fences3 with Windows 10 on another computer with 3 monitors) I have 3 monitors side by side and Windows always reports them in the same order from left to right: 2: (DVI 1) left (Windows main screen &a

Hallo , ich habe mir das Upgrade Start10 (5User) zu Start11 gekauft. Warum ist Start11 nur für 1User ????? Mittlerweile sieht man bei keiner Stardocksoftware mehr, für wieviele User eine Programmlizenz ist. Das finde ich wenig transparent. Das gehört in die Programmbeschreibung hinein, vor allen, weil damals auch 5fach Lizenzen verkauft wurden. Bei einem Upgrade gehe ich davon aus, das das dann auch 5fach Lizenz ist :-(( Gruss, Manfred</p