[quote who="LazarusTorbica" reply="15" id="3950194"] What happens if I select the "All" option in the Export Range? [/quote] LazarusTorbica, please follow the directions I have provided. Sean Drohan Stardock Product Lifecycle Manager
[quote who="Peppe65" reply="7" id="3950208"] the procedure I did: I uninstalled v3 on both PCs, restarted both PCs, installed the same v4 version on both PCs ... it gave me an error and I wrote on the forum (You may need to change the firewall even if you use a different firewall) what should I do? [/quote] I suspect the error you mean is this
All, The Fences beta has been updated to 5.86. For details, please see: https://forums.stardock.com/531354/get;3946718 As always, thank you for your time, feedback, and support. Sean Drohan Stardock Product Lifecycle Manager
[quote who="Anileania" reply="40" id="3950047"] Screen runs same resolution as when it's not running seamless. 1900*1024. I've also tried setting it down. No luck. If I don't do anything it will eventually disconnect. The primary computer is showing the screen as screen nr 3. And it's extended. [/quote] Just to be clear, this is when you try to initiate a "Seamless Display" connection, you are able to get it to connect but its a black screen, and
[quote who="LazarusTorbica" reply="13" id="3950122"] And for the Export Range? Do I select "All" or "Selected Branch"? [/quote] The default, 'selected branch' making certain you have selected the 'Fences' one. Sean Drohan Stardock Product Lifecycle Manager
You seem to have a lot of moving parts here and some connection scenes and mediums that make this difficult to follow let alone test. Perhaps you could diagram this out a bit more and eliminate other connection mediums (RDP). Sean Drohan Stardock Product Lifecycle Manager
[quote who="Aoyma3780" reply="74" id="3950102"] why isn't it there WB11 why, I bought it on Steam, it won’t ask you to enter your email maybe we can do something already... [/quote] While many people here have tried to help you with your issues over several days, I feel there is no measurable progress being made. Its clear this process has frustrated you as well. For these reasons, it would be prudent to seek a refund from Steam for your purch
[quote quoting="post"] I had a subscription to version 3 now I purchased a subscription to version 4 when I go to install it the primary computer cannot connect to the secondary computer ... I followed the various procedures that are indicated on your site but I always have the same problem of no connection ... I tried via cmd to do a ping and it's ok ... I also tried to format the PC but it cannot connect .... clicking on the test button gives me an error kindly help me .. thanks <
You want everything under the Fences key for each location. Sean Drohan Stardock Product Lifecycle Manager
[quote who="DARKONE33" reply="36" id="3949936"] I didn't notice it until it was brought up and I have no issue with it but just looks odd. I'm not sure if this will cause any issues with long-term use, If I do find any I will open a new thread. [/quote] Thank you. Sean Drohan Stardock Product Lifecycle Manager
[quote who="DARKONE33" reply="34" id="3949925"] To add to Anileania's Post Multiplicity is doubling the secondary screens refresh rate. So if I set is to 60hz it shows as 120 hz and if I set it to 144hz it will show 288hz. [/quote] In its current form, Multiplicity cannot actually affect what the Secondary display refresh rate actually is. If the actual monitors connected to the Secondary are set to 60hz, regardless of what the Primary reads when connected to the
[quote who="Anileania" reply="32" id="3949900"] Hi and thank you for the response, how ever I have to write that it makes no sense. None of my screens are set to 120. [/quote] That it is reporting 120 on the Primary does not necessarily mean that is why it ' Still does not work. ' You have not yet stated what exactly it is you are trying to do that is not working. Can you detail what that is (what you are doing) and what the result is?
[quote who="LazarusTorbica" reply="9" id="3949917"] There are two registry entries/files/keys, not just one. Do I follow the same process to export them both, [/quote] Yes, same Export process, a different location is all. Sean Drohan Stardock Product Lifecycle Manager
[quote who="T0mate" reply="9" id="3949859"] Some more details I found the grouped windows with Groupy are separated to different windows on the task bar. I have 7 Groupy tabs of brave windows but only 3 windows are accessible on the taskbar. It seams Groupy are grouping multiple groups in one. It is like all groups are on one tab bar but in fact there is 3 separated groups in "logic". [/quote] Are you able to reproduce it in any other browser? Se
[quote who="Anileania" reply="30" id="3949825"] Reply #30 November 5, 2024 12:44:33 PM from Stardock Forums Maybe I miss wrote. The PC screen cannot support 120 hz, and it only goes to 120 Hz when I try to use it as an extra monitor. It's running fine when not trying to use with Multiplicity. [/quote] Heard back from the lead developer. " Thats the virtual end that has that (120) rate. The physic
[quote who="Anileania" reply="28" id="3949798"] Cool, thanks for the correction, but what about my problem. It still only show 120 Hz [e digicons]:)[/e] [/quote] While I will inquire about it, Multiplicity does not affect how Windows sees the monitors new Seamless Displays or what options are available for it. Sean Drohan Stardock Product Lifecycle Manager
[quote who="Anileania" reply="26" id="3949778"] I saw an add that stated something like you could RUN OBS on the 2nd computer ect. And that would be insanely cool. [/quote] Yes, you certainly could but you seem to be confusing "Seamless Display" with "Seamless" connections. Seamless Display allows you to connect remote monitors to the Primary PC as if they were its own. In terms of capturing with OBS, it would have to be running on that Primary PC, not the Seco
[quote who="Aoyma3780" reply="6" id="3949538"] SINCE FOR MY 11 YEARS [/quote] [quote who="Aoyma3780" reply="18" id="3949560"] I AM A CHILD AND I HONESTLY CAME TO YOU TO BOW TO YOU AND BEG YOU TO HELP ME PLEASE [/quote] I get the impression that you are a fairly young lad. Is it at all possible that someone with more experience can help you with this process? For now, dont worry about 'purging. Make sure WindwowBlinds is installed
[quote who="DARKONE33" reply="18" id="3949639"] Doing more deep diving over the weekend, It seams all ties in with the sidebar. So #1 it can be disregarded and change to if any time a sidebar was used and continuous configuration and setting changes are done it will crash Multiplicity. I do have dump from WinDBG. I can PM the link to download it. [/quote] You are confusing us here a bit, Dark... Define for us: ' continuous config
[quote who="DARKONE33" reply="16" id="3949493"] Here is an update on KVM lag and lockups. I was able to get is work with default setting, after rebooting the primary & the secondary. Doing more testing I was able to Triger the issue on command. 1. Opening and configuring Multiplicity on the primary computer causes the KVM to lag, lock up, or crash. This happens less frequently when configuring occasionally, but continuou
Closing thread.
[quote who="ivanthomson6814" reply="22" id="3949475"] Is there some reason I am unable to to drag & drop between my desktop (primary computer) to a secondary window displaying their desktop? [/quote] Drag and drop only works for Seamless connections, not for KVM. Please use copy \ paste as you detailed in your post. Sean Drohan Stardock Product Lifecycle Manager
[quote who="ken_webber" reply="16" id="3949460"] Are we still waiting for an update to activate Multiplicity Pro for us recent KVM purchasers? While I did receive the e-mail saying I have been upgraded to Multiplicity 4, it appears that the pro features are still not enabled. I purchased KVM at the beginning of October, so according to the documentation, I should qualify for the Pro license. [/quote] The wrong product was applied to your account during the process. I h
I believe this post was originally created before Groupy 2 was released: https://www.stardock.com/products/groupy/history It would be prudent to install Groupy 2 and create a new feature request post for what you feel is still valuable to have in the product. Sean Drohan Stardock Product Lifecycle Manager
[quote who="xerxes00" reply="13" id="3949442"] It does show as two displays in the Display control pane. I changed the setting there to "Show only on 1" and it disables the second display and Multiplicity picks it up as one monitor now. [/quote] Interesting... Thank you for the update. Sean Drohan Stardock Product Lifecycle Manager