sdRohan

[quote who="mattaragon" reply="48" id="3951691"] Is there a upgrade option/trail for adopters of Multip3 users I'd like to see/try the new improvements. [/quote] There is a trial, yes: https://www.stardock.com/products/multiplicity/ Sean Drohan Stardock Product Lifecycle Manager

That file: SdAppServices_x64.dll Has been in all of our apps for many many years and has not changed in a very long time. If it was corrupted by a virus, it was not delivered that way via the installer. As noted here already, it is almost certainly a false positive. Sean Drohan Stardock Product Lifecycle Manager

That file: SdAppServices_x64.dll Has been in all of our apps for many many years and has not changed in a very long time. If it was corrupted by a virus, it was not delivered that way via the installer. As noted here already, it is almost certainly a false positive. Sean Drohan Stardock Product Lifecycle Manager

[quote who="frankdeming" reply="5" id="3951594"] I have not seriously looked at this product because of the UI. What are you thinking? Couldn't you at least put it inside a basic dialog box so I minimize it, move it, close it? I have two displays and would put on the second display. Just tested 1.0 and well I finally found a sweet spot to drag the box but there is no visible reinforcement of it. The drag bar is not the outline! Discovered that if I clicked the drop

We have observed that they WOL systray option seems to be grayed out no matter what - we are looking into it. I have logged it - thanks for the report. Internal ref: ODNT-9175 Sean Drohan Stardock Product Lifecycle Manager

While I may have found an issue with re-recording where the cursor is mapped to after an edit, with each new creation [quote who="mechman4077" reply="5" id="3951637"] Thank you for your reply. I have tried to set the mouse on primary PC, which it will, but it doesnt put it where i tell it to. If i tell it to place it anywhere on screen 1 it puts it in the correct potition on my secondary monitor, but if i place it on screen 2 it puts it right along the left side of my primary monito

[quote quoting="post"] [/quote] I am going to send you a build via private message with some instructions. Please reply to it as soon as you can. Thanks for the report and time. Sean Drohan Stardock Product Lifecycle Manager

[quote quoting="post"] Win11 devices, system default Simplified Chinese environment. The page of the software installation process is garbled. This issue has existed for a relatively long time, but I just realized that it is still the case with the 5.86 upgrade, so I'm here to give feedback. Please refer to the image below: <img src="https://cdn.stardock.us/forums/73/57/7357869/d88adae1-4808-488a-bab2-66b48b43515c.png" alt="" width="623" height

[quote who="ImTiredOfThinkingUpUsernames" reply="105" id="3951539"] Windows Settings (the newer Universal kind) don't appear in search results. I used to be able to type the name of a Windows Settings page (like "Update") in the Start11 search box and stuff like the Windows Update app would appear in the results. Now, none of the new (Universal) Settings appear in search results. I can only search for the old Windows7-style control panel apps. Windows 11 Pro, Versio

[quote who="gianfran14" reply="3" id="3951536"] Hi, ran into the same issue as Discord changes path with each new version. Any implementation for a wildcard when creating rules? [/quote] There have been no changes to Groupy in this area. Sean Drohan Stardock Product Lifecycle Manager

[quote]The only (partial) workaround I've found is to rename the folder shortcuts so they appear above app shortcuts. (eg Renaming "PI Today" to "_PI Today" [/quote] Since this is essentially pinning a Windows native component (Windows Explorer), it would adhere to its sorting, in this case, alphabetical. Your method to rename the folders \ file to achieve the sort would be proper but I can log it to at least respect the current sorting of the folder pinned (by size f

It reads like you are asking about losing your settings by changing their desktop folder. Fences supports the desktop folder being anywhere on the system, but it stores its data as full paths, not relative to the desktop folder. So, if you change the desktop folder, Fences will continue to work but you may have to put the icons back in their fences. (Icons may fall out of their fences at that one singular time.) <s

All, Fences 5.86 has been released. For more information, please see: https://forums.stardock.com/532389/fences-586-release-feedback-thread As always, thank you for your time, feedback, and support. Sean Drohan Stardock Product Lifecycle Manager

All, Fences 5.86 has been released. For more information, please see: https://forums.stardock.com/532389/fences-586-release-feedback-thread As always, thank you for your time, feedback, and support. Sean Drohan Stardock Product Lifecycle Manager

***Reserved***

Known issues While we appreciate all feedback, please remember that we offer no official support for beta \ preview \ developer channel versions of Windows. If you report issues while in any of those early release channels, you should not expect them to be addressed unless it still exists in a retail version of Windows. As part of an ongoing effort to resolve some installations not overwritting files for existing Fences 5 inst

[confluence]https://stardock.atlassian.net/wiki/spaces/SHC/pages/2076639280/Fences+5.85+Beta+Changelog[/confluence]

With the Fences 5.86 release, we are creating this thread so that users can report any observed issues. [confluence title=""]https://stardock.atlassian.net/wiki/spaces/SHC/pages/1452998657/Software+Release+Template[/confluence] Thank you for your interest and any time you put into making Fences 5 a better product. Sean Drohan Stardock Support Manager

[quote who="jlegg4" reply="6" id="3951385"] Thank you VERY much for stepping in and helping out and for a fantastic, very usefill application. Makes life much easier! [/quote] Pleased to read and you are most welcome. Sean Drohan Stardock Product Lifecycle Manager

[quote who="PhoenixRising1" reply="9" id="3951077"] Microsoft's insider previews are pretty confusing right now. [/quote] You win the understatement of the day 😉 Sean Drohan Stardock Product Lifecycle Manager

[quote who="mechman4077" reply="3" id="3951086"] thank you, i have added a hotkey (currently F11) to bring my mouse to my primary screen in the center, but it doent put it there lol. [/quote] Actually pick the PC and where you want the cursor placed: [quote who="mechman4077" reply="3" id="3951086"] another thing i have noticed now,

[quote who="pelaird" reply="6" id="3951050"] I'm running this same build (22635.4445) and can confirm this issue. The taskbar thumbnails are showing as if the the start button is set to left aligned. If the start button is set to Center aligned they display normally above the taskbar button. [/quote] It would seem that Canary has yet to receive an update that Dev has. We cannot reproduce it on: <img src="https://cdn.stardock.us/forums/48/71/4871965/747d307d-3aa0-4

[quote]As seen the preview of the apllication peek is displaced to the left. All times [/quote] As noted, we can't support Windows Insider builds but we most certainly appreciate the report. Is the displacement seen with the icons left justified? Is it seen for ALL apps or just some? Sean Drohan Stardock Product Lifecycle Manager

[quote who="jlegg4" reply="2" id="3950955"] Do I need to modify the secondary's rules as well? [/quote] It is always the best choice, yes. [quote who="jlegg4" reply="2" id="3950955"] but would like to know which executables I need to add exceptions for [/quote] On the Primary, for KVM, it would use multi2_64.exe and the Secondary would use multisrv64 and multiplv64. That said, if y

[quote]is there a way to disable that screen from the chain? [/quote] No (at least not at this time) as it would require editing how Windows itself (on that Secondary) sees its own monitors. What you may want to employ are hotkeys for quicker access to whatever location \ monitor you wish Sean Drohan Stardock Product Lifec