There is an issue, for some, where a right click on the desktop when it appears has Fences loading as expected. Can you confirm this works for you? Also, do you have DeskScapes 8 installed as well? There is also and issue (rare) with immovable icons when both are installed. In any case, both are being worked on.
You might get this if you did not reboot after the install. Also, try disabling your antivirus so that it still is so after a reboot and try to install \ use WindowBlinds again.
It sounds like something in your configuration files may be corrupt. First you will want to back up any dock settings you may have. To backup your ObjectDock settings: -Right Click on the dock and choose 'Settings' -Click 'Troubleshooting Options' -Click the 'Open ObjectDock folder so I can backup settings' --(C:\Users\{USERNAME}\AppData\Local\Stardock\ObjectDockPlus) -Copy contents to another location In ObjectDock, go to S
[quote who="N9OK" reply="6" id="3372563"] Sean, I generated the file but it's not clear to me where to send it. I'd prefer to not publicly post it in the forums.[/quote] Send it to support@stardock.com with the detail of your issue. Anyone of us here that get the ticket can resolve it.
Deleting a fence manually involves editing the registry and would be something I would want you to place a support ticket for; support@stardock.com Please run this support tool and attach the log file recorded with the detail of your issue and we can take care of it.. http://sd.stardock.com/SDSupportTool.exe
How current are you video drivers? Nvidia: http://www.nvidia.com/Download/index.aspx?lang=en-us If this does not resolve your issue, please create a support ticket at support@stardock.com
Try restoring a previous snapshot (automatically taken daily by default)? http://sd.stardock.com/sean/jingimages/2013-06-11_0825_001.png
Are your video drives current? Intel: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu Nvidia: http://www.nvidia.com/Download/index.aspx?lang=en-us ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
Please navigate to the following folder: Sins of a Solar Empire Rebellion\redist Run the 'REDIST.EXE' or 'VCREDIST_x86.EXE' file within there to reinstall \ repair the redist. Once that has been done, try to play the game again.
Yes, you can control a 32 bit Secondary with a 64 bit Primary and vise versa.
Do you have a mouse plugged into the Secondary, and if not, does it show if you do? Also, if you switch the Primary to a Secondary, and vice versa on the Secondary, does the same thing happen?
On the Secondary MP2 machine, make sure the 'Fake pointer...' option is enabled: http://sd.stardock.com/sean/jingimages/2013-05-28_1415.png
WinCustomize Forums
[quote who="TwoWolves" reply="19" id="3360069"]I don't seem to be able to apply any of the skins (Win8 64bit). I get a dialog "Problem Detected" : Windowblinds does not appear to be installed correctly on your machine. Would you like to try to fix this issue now? I select Yes and it runs something but nothing is fixed. Also reinstalled myself. Still the same message. Any suggestions?[/quote] As a test, temporarily disable any sec
[quote who="sugardad78" reply="24" id="3357569"] I also have The same Problem I have Issued a ticket since yesterday and I'm marching towards a full two days without support Come on guys!! Ticket ID: #WPJ-866-72295[/quote] Please note that replying to a support ticket before receiving a reply from technical support will reset the activity counter on the ticket. This will move your ticket to the end of our incoming work queue and delay our response. Th
Make sure you do not have any specific rules set up that are possibly placing the icons on and alternate Desktop Page (Fences config, Sorting / organizing). Also, you might want to try restoring to a previous 'snapshot' to see if this resolves your issue. http://sd.stardock.com/sean/jingimages/2013-05-14_0817.png Worst case, you can, on the same config menu, 'Perform automatic layout'
When you lose audio, do you also lose the ability to mange the sending \ receiving Multiplicity machine (mouse to, copy, paste, etc)?
[quote who="dypsis" reply="1" id="3352067"] I don't like being prompted either, mate. I guess it is OK if it is a trial, but I am fully registered, yet I am prompted to install Decor8.[/quote] Suggesting alternate products produced by the same company during an install is not uncommon in the industry and effective at introducing clients to products they may not be aware of. That said, are you saying that you already had Decor8 but it was still offered
Stardock Forums
[quote quoting="post"] If you make a fence from a directory and make the view for the fence 'List' it does what it is supposed to. If you then resize your screen resolution the view for that fence changes to 'Details'. Hope this can be fixed as I use fences a lot in list view and also have to change my resolutions quite often. EDIT: This is still broken in beta 2.1 [/quote] I was not able to r
It looks like your activation attempts actually failed. I have reset them here, please try again. It if is successful, you would have a tilessig .bin file(s) in your C:\ProgramData\Stardock\Registrations directory. If not, please place a support ticket at support@stardock.com
While you cannot turn off auto-arrange within a Fence (you can outside them), you can change how it arranges (name, size, etc).
Currently Start8, Decor8, DeskScapes 8, Fences 2, Multiplicity 2, Tiles, IconPackager, IconDeveloper , ModernMix and WindowFX 5 are designed to work with Windows 8. WindowBlinds should be ready in early to mid 2013. Other applications may or may not work. At this time though, they are not supported. We are updating more of our software as time goes on so keep an eye on our forums for more details.
Start8 will stop functioning if the trial has run its thirty days and it has not been activated. However, I do see that you did activate after this post. Let me know if that did not resolve your issue.
Is the image perfectly square?
Currently, no, this is not an option in Fences 2...
I have created a support ticket for your issue.