rfajman

Why not include a link for downloading it? Also, is another version coming sometime? With the previous beta copy/paste of a file from one PC to another in KVM mode didn't work for me, but did work, although a bit strangely, in the earlier released version. Here's my current Windows version: I've refreshed windows in the meantime. The other PCs ar

Why is it so difficult to get new releases of software that I already own? Just now I wanted the new version of Start11. In the Support area there is a short section called something like "accessing software though a Stardock account" (which I have). It says that it can be done, but doesn't say anything about how to do it. The same text appears in a number of places. I looked in several places without finding anything helpful and finally downloaded the trial vers

Yes, you are right. Selecting a subnet would be fine for my purposes. Thanks for the shrunk screen suggestion, I'll try it out. Actually, one of my machines has a small screen, so I don't need to mess around withe taskbars with that machine. I do wonder how the bigger screens will look when shrunk, though. I'll find out. P.S. - I'm a retired software developer too.

I knew that I would remember something else to ask for. I've had difficulty with taskbars. I'm using Multiplicity to maintain several computers without having to get up and go to them. I don't walk very well at all anymore, due to my health, and I use a Rollator (walker with 4 wheels). Anyway. I need both the primary's and secondary's taskbars in KVM mode. I found that the primary's taskbar overlays the secondary's if both are at the bottom, which makes sen

As I said in another post, things are working pretty well for me now, but there are a few small changes that I would like to have: (1) An option to have the primary start in KVM mode. Right now, at least, I have no use for seamless mode. (2) An option to restrict Multiplicity traffic to a range of IP addresses. I'll probably think of something else later when I have more experience with Multiplicity.

Things seem to be working reasonably well for me now. Here's what I have: (1) I'm using the 4.07 release instead of the 4.06 beta. (2) I am using IP addresses on my private Ethernet subnet instead of hostnames or the subnet that goes to the wireless router. (3) I have 4 machines: 3 Windows 11 and 1 Windows 10. The primary is Windows 11. (4) I don't use Windows Firewall, but rather Norton 360. My firewall rules look like

After giving the issue more thought, I'll try my questions in a slightly different way. On the Ports and Files page, there are three ports listed for Multiplicity 4 Pro KVM: 30564, 30565, and 30567. Are they the required destination ports for their functions, or are they required to be the source ports as well? The Files section lists five files, mostly without specifying functions. Does that mean that the three ports should be defined for each of these files? <

I tried your idea and got some odd results: One computer located by the search had the name of my primary, but the IP address of one of the secondaries. Very odd. Besides that, it said that my two subnets were being searched, but didn't find anything. Perhaps it happened because of the firewall rules I have put in. Unfortunately, the firewall doesn't make it easy to experiment because of the number of rules that seem to be needed and the fact that they all

I want Multiplicity 4 Pro KVM to use my private Ethernet, not the Internet connection. It seems like the best way to do that is to use my firewall to only allow connections that go the way I want, because Multiplicity does not seem to have that option. However, I find the description of the Multiplicity ports in the Support area of the website to be confusing. In the Ports section, there is no port listed for Multiplicity Application (Remote screen control). In the Fil

I stopped trying to get Multiplicity to work because of all the problems I was having. Now I'm back trying again. I have Muiltiplicity 4 Pro and am using the 4.06 beta. I have 4 PCs (3 Windows 11, 1 Windows 10), all in the same room. and want to use KVM mode. The primary is Windows 11. There are 2 subnets: 192.168.1.0/24 is for access to the Verizon wireless router. I don't want Multiplicity to use that subnet. 192.168.2.0/24 is a private Ethernet t

I really wish that Stardock would post in some not to hard to find place the current version number and release date for each of its products. I like to keep track of this information so that I know when I am looking a description of a product whether I already have that version. Most other software companies are willing to do that for their customers.

Suggestion: I would like to be able to specify the function of the big Shutdown button. What I usually do is Lock, but when it's late and I'm tired, occasionally I have clicked on the big Shutdown button instead of the little arrow for the menu. This is a pain because then I have to reboot. Even if I cancel the shutdown, some unknown number of programs have already terminated. Another possibility would be to ask for confirmation of things like Shutdown, Restart