Loeffelmaster

I don't know if this might be the problem in your case, but I had the problem that the explorer crashed too. It was not fences (as I thought in the beginning) it was Deskcapes 11. There is a thread here in the forum about it where Deskcapes 11 crashes the explorer on Windows 11 with a multi monitor system. Some user could prevent it by just using one picture on all monitor instead of a different picture on every monitor. I had this message once too. In my case just deinstalling Des

Hi Butch, I have the latest Updates installed, but no change for me. The explorer crashes and I can't use the windows taskbar, as I need to click it first before I can do anything and double clicks are most times impossible because when the second click comes the taskbar is already unresponsive anymore and I need to click it ones. The crashes alone are so often, that using DeskScapes is a no go. I tested other configurations, only ony playlist on all monitors, just for one mon

I have the same problem, from time to time (very often in fact) the explorer freezes, the desktop is empty and the mouse cursor shows the pause symbol. Clicking the desktop (normally twice), makes Windows ending the explorer and restarting it. Then everything is fine until the next crash. First I changed the timing for the pictures to change, as I thought the crashes came after the change or better with the change, but I was wrong as the crashes also happened in between two changes.

I have Fences 5 installed. I hadn't any problems for a month now, even though I updated the graphics driver. A few days ago I needed to shut down the PC and when coming up I had a mess with the monitors as windows dumped some settings. Even then it worked and after returning to my normal configuration everything stayed the same. So at the moment everything seems fine. The only thing that was wrecked after the monitor mess where the backgrounds with Deskcapes 11. Those lists I nee

Can you read the date of the first installation of the monitor? It is part of the driver definitions of every monitor. Via that you might make an own numbering, which maybe even changed by the user. As the dat of first installation is with date, time and even seconds, every monitor should be unique or can easily be made unique by deleting all monitors in Win10 and reconnecting them afterwards in the sequence that is wanted.

I have this problem still too. It never changed. The problem is less prominent since I deleted all monitors and reinstalled them. I did this, as I had problems with my new monitor and reopening of windows. As my new monitor is gone for the PC when turned off (I can't change it, only when I connect him via HDMI, but then I can't use his full resolution). Now windows doesn't open on the primary monitor, as that is always off in between. Now I could make my system to open those windows at least

Hello, it would be very convenient if Deskcapes would support Split Screens / monitor zones. There are more big monitors on the market and widescreen (curved or not) on a lower prize. I have now a widescreen monitor (5120x1440) and working with it is really fun. Unfortunately using the whole monitor for office applications is just too big. So at first I used FacyZones to create two zones where I can restrict my windows. Now I switched over to DisplayFusion as it offers several ve

For testing I deinstalled Start11, deinstalled Object Desktop, deleted all Object Desktop downloads. Reinstall Object Desktop and then reinstalled Start 11 from Object Desktop. It immediately tells me to update Start 11 from 1.3.6 to 1.36 For testing purposes I've installed the new beta and now Object Desktop states I should update Start 11 from 1.3.7 to 1.36 When I look into Start 11 and click there on info it states to be version 1.37 and not 1.3.7 so I checked the file

I have the same problem, but I also suddenly can't install anything via the Object Desktop GUI as the program always says "Cannot find the install file. Please close and reopen Object Desktop and try again." Nothing works to resolve that problem. I tried to install something else and there I have the same problem. Even restarting the computer doesn't change something. I've installed the Start 11 Update manually now, but at the moment I would need to install every package manually. I

The snapshots doesn't work at all. When I identify the monitors their numbering is the same in color management and in the normal display configuration. If I look into the backup XML the display numbers are also correct. I haven't the problem, that the icons change after each restart and most times when a monitor misses and is added later (because he was fully turned off), the icons are realigned correctly. But sometimes they aren't and when this happens I'm literally f...d be

I have a problem with the new Fences Peek enabled by default with hotkey Windows key + space feature. After sometime without any logical reason pressing normal space won't work anymore as always "Windows key + space" is made. First I thought a stuck key so I pressed the Windows key several times alone, but it works fine and doesn't change anything. Only solution to correct this is turning off the feature or res

Oh my, I really haven't seen that Settings Button. Sorry.

These settings I found, but I want to set how the background pictures are shown. Some wallpapers are bigger then the screen and so just a small portion is shown, others have a big border with nothing around. So I would like to set the default so the pictures are made bigger or smaller until one border hits the screen border. It is possible to do that for those from the cloud and there is also an option DeskScapes Default, but such a setting is useless, if you can't define t

I looked into the settings and yes, I can change the settings for a single picture, but only for the cloud ones, not for my own ones I have in my private picture collection. So I tried to find the default settings for DeskScapes. I am using the DeskScapes 11 Beta.

Hello, Newest Windows 10 1903 [Version 10.0.18362.295] Groupy Version 1.25 (Update says no newer version available) Need some time to setup my rig for making the video. Normally I just record one monitor or window. I know that, but windows as cmd-prompt or file explorer and other Windows included programs remember their last position and size. Without groupy this functionality is given. It doesn't make a difference if it is a single instance o

Hi, normally Windows remembers on which Monitor and which position a program was last closed. With maximized windows there doesn't seem to be a problem, but normal windows are always reopened at the same position on the primary monitor. Is there any way to change this behaviour, as it is very annoying. Yours Loeffel

Hi, is there any way to close all open tabs with one click instead of closing all tab? Yours Loeffel