Start Menu graphics glitches using Molten skin

WindowBlinds version : WindowBlinds 6.03 (build 45 x86)

WindowBlinds is installed correctly on this PC
WindowBlinds appears to be activated on this PC
Your machine supports per pixel borders on WindowBlinds skins.

(SyncMaster 910MP/199MP,SyncMaster Magic CX912MP) 1 is attached to RADEON X800 PRO

Wblind.dll      2008/03/31 12:21:20
Wbsrv.dll      2008/03/31 16:25:10
Wbconfig.exe      2008/03/30 11:29:34
Wbload.exe      2008/03/30 11:27:14
Wbhelp.dll      2007/08/27 11:54:07
Wbui.dll      2007/11/06 10:13:05
Tray.dll           2007/09/12 17:58:21
Screen.exe      2008/03/29 15:09:18
----------------------------------------------------------------------------------------------------------

So basically the start menu button "eye" has a bit of its lower curve slightly lower then where it should be, and the right vertical bar on the menu is not lined up with the width of the menu itself, its about a 1/2 inch to far to the left.  Anybody got any ideas as to what might be causing this, I am sure its something I am missing but I can't figure out what it could be.  I have tried uninstalling, reinstalling, completely disabling Panda Internet Security, rebooting, and just about everything else that I could find on these forums as "common solutions".  I am running at 1280x1024 if that makes any difference.  I have tried changing resolutions but it had no impact.

thx for your time.

-corrandk

10,988 views 3 replies
Reply #2 Top
So after spending the weekend doing other stuff I sat daown again to mess with this issue and and found that I had set my adapter DPI to large (120) rather ten normal. Putting it on normal has fixed the issue.
Reply #3 Top
Putting it on normal has fixed the issue.
End of quote


As it usually will...good job man.

If you need larger text,its usually best to change it within WBconfig...skins seem to do better that way. :)