WB6 Config Screen is cutting off

from Stardock Forums
My WB6 config screen must be off leveled. When I try to look at all my themes, it seems the preview screen is cut off on the right side. It's as if the display properties of the config screen are not setup correctly for my computer. My screen's Resolution is set to 1900x1200. It just seems like the config screen is not wide enough to display all the information. Any ways to fix this? Thanks. Also using XP.

Reako
windowblinds
5,752 views 20 replies
Reply #1 from WinCustomize Forums Top
screenshot?
Reply #2 from WinCustomize Forums Top
Here you go. Please notice how everything is cut off at the right, and I can't even see the arrow to slide the scroller to the right. I don't understand why.

Offworld Trading Company
Reply #3 from WinCustomize Forums Top
maybe it has to do with your screen ratio

WB configure is basically locked into one size and it's not resizeable
Reply #4 from WinCustomize Forums Top
Interesting SS, you have the buttons on top,(close, min and max), but you lose the scroll bar button on the bottom. Have you changed the DPI settings or font size?

I have XP also and running WB6, resolution is at 1280x1024 and have no problems. :NOTSURE: 
Reply #5 from WinCustomize Forums Top
(I'm running 1024x768)


Reply #6 from WinCustomize Forums Top
Have you changed the DPI settings or font size?
End of quote


good question
Reply #7 from Stardock Forums Top
I think you are confused with the SS resized image. My resolution is 1920x1200. I've tried changing the resolution and it's still messed up. Maybe I need a reg edit? Just not sure where else to start... Haha

Reako
Reply #8 from WinCustomize Forums Top
Why do you think you need a reg edit? You didn't answer the question about DPI settings of font size. Do have this problem with any other applicatins that open a window that is not full screen?
Reply #9 from Stardock Forums Top
Every other application on my computer works flawlessly. When opened Full screen of minimal screen. Changing DPI settings does not help. I also don't see how changing font size would help but I will try.

Edit. Font settings did nothing.
Edit. DPI settings did nothing as well...

And when I referred to reg edit, I was referring to a reg edit based on WindowBlinds. Not for my computer.

Reako
Reply #10 from WinCustomize Forums Top
I think there was one other post here in the forums with the same problem, you may want to do a search of the forums.

The only other thing I can think to check is your drivers for your video/graphics card. Are they current? When I mentioned DPI and font size what I was asking was had you changed them recently. Don't know about this, but could you have run a program the changed them, maybe a game?

If none of this helps you will need to email support@stardock.com and start a ticket with them. When you do give them a link to this post so they can see what you have tried to correct the problem. Hope you find a solution.
Reply #11 from WinCustomize Forums Top
click the system info tab
click the copy text button
paste it here
Reply #12 from Stardock Forums Top
Huh?

And I just found the other thread. Seems like it was never fixed then either...strange.
Reply #13 from Stardock Forums Top
same problem. there is (are?) another discussion on wincustomize forum, with no solution. in my case the config panel is cutted at the top and i must always pull the window down with the mouse.
Reply #14 from WinCustomize Forums Top
I have noticed this happens on wides screen format ie...1440x900 or equivalent ratios.

Does your start menu also sometimes not stretch right ?I just helped a user with this a day or 2 ago!
Reply #15 from WinCustomize Forums Top
i kmow WB config pretty much needs higher than 800x600

it may be locked into a set ratio based on either width or height

Neil would know
Reply #16 from WinCustomize Forums Top
it may be locked into a set ratio based on either width or height
End of quote


Bichur I believe you are correct that it is a ratio!
Reply #17 from Stardock Forums Top
There is an update available as of today. Please try uninstalling the software, restarting, installing to this new build, and be sure to restart before you use it. Let us know at support@stardock.com if you have further troubles.

Reply #19 from Stardock Forums Top
Worked perfectly on my problem. Thanks a lot!

Reako