Windowblinds 6 and computer control panel

from Stardock Forums
Installed wb 6 and when I aply any skin, everytime I access my computer control panel I get these errors: "unknown nt operation system code 6 detected" and "read config file failed"!


My system info:
Your computer has a Windows Experience Index base score of 5.1
Your Windows Graphics Experience score is 5.9

WindowBlinds version : WindowBlinds 6.0 (build 49 x86 - Vista Edition)

WindowBlinds is installed correctly on this PC
WindowBlinds appears to be activated on this PC
(Monitor PnP Genérico) 1 is attached to NVIDIA GeForce 8800 GTS

Wblind.dll 2007/10/01 12:34:20
Wbsrv.dll 2007/10/16 12:37:26
Wbconfig.exe 2007/10/01 18:09:33
Wbload.exe 2007/09/27 16:42:44
Wbhelp.dll 2007/07/11 15:06:07
Tray.dll 2007/09/12 18:52:21
Wbload.dll 2007/09/12 18:58:28
Screen.exe 2007/10/16 12:37:24

windowblinds
9,293 views 11 replies
Reply #1 from WinCustomize Forums Top

Are you getting something like this: http://www.vistax64.com/vista-general/3299-unknow-nt-operating-system-code-6-detected.html

It sounds like there may be a cpl Windows tries to load, but doesn't like.

Have you installed anything recently that would hae put something into your control panel? (WindowBlinds does not install a control panel app)

-Mike
[Stardock Support]

Reply #2 from Stardock Forums Top
I didn't install anything else after install wb6. And my vista is vista 32 not 64!Could it be nvidia control panel, or Iconpackager? These are the only new things in the CP.
Galactic Civilizations III
Reply #4 from Stardock Forums Top
Tryed with the shareware version and the same problems occurs... So, can I get some reply here?
Reply #5 from WinCustomize Forums Top
Vampiro2000 I've noticed some folks identifying problems with the nVidia control panel. You might want to email Support@Stardock.com.   
Reply #6 from Stardock Forums Top

Could you go to Start->Start Search and type cmd

Then type this and press enter:
dir C:\windows\system32\*.cpl>C:\output.log

The results will then be in a file called output.log at your root C:\ directory, which you could post here or if you prefer, send an email to support@stardock.com.

-Mike
[Stardock Support]

Reply #7 from Stardock Forums Top
Here is the log:

O volume na unidade C nÆo tem nome.
O n£mero de s‚rie do volume ‚ 90A8-1F56

Direct¢rio de c:\windows\system32

25-05-2004 15:06 417.792 ac3filter.cpl
02-11-2006 10:44 1.119.744 appwiz.cpl
02-11-2006 10:44 989.696 bthprops.cpl
15-11-2004 19:02 258.048 cmdiag.cpl
02-11-2006 13:33 83.968 collab.cpl
02-11-2006 10:44 368.640 desk.cpl
02-11-2006 10:44 2.248.704 Firewall.cpl
02-11-2006 10:44 183.296 hdwwiz.cpl
10-10-2007 10:59 1.824.768 inetcpl.cpl
02-11-2006 13:33 26.112 infocardcpl.cpl
28-08-2007 20:56 337.408 intl.cpl
02-11-2006 10:44 418.816 irprops.cpl
24-09-2007 23:31 69.632 javacpl.cpl
02-11-2006 13:32 442.368 joy.cpl
02-11-2006 10:44 484.864 main.cpl
02-11-2006 10:44 1.085.952 mmsys.cpl
02-11-2006 10:44 164.864 ncpa.cpl
17-08-2007 16:23 413.696 nvcpl.cpl
15-12-2006 12:04 27.136 PCWizard.cpl
02-11-2006 10:44 163.328 powercfg.cpl
20-10-2006 08:56 532.480 RTSndMgr.cpl
02-11-2006 10:44 238.080 sysdm.cpl
02-11-2006 13:32 691.200 TabletPC.cpl
02-11-2006 10:44 106.496 telephon.cpl
24-10-2007 15:35 714.240 timedate.cpl
24-01-2007 20:21 112.008 wmdConn.cpl
02-11-2006 13:32 1.685.504 wscui.cpl
27 ficheiro(s) 15.208.840 bytes
0 dir(s) 9.992.925.184 bytes livres

Reply #8 from Stardock Forums Top
I had this problem with version 5 to when I installed 6 it still does it when I go into control panel I try to go to uers, Network connection, just any thing in there and it freezes can some one help me with this problem please.
Reply #10 from WinCustomize Forums Top
Bump this again Monday morning (Michigan time).  Support and devs aren't as active on the weekends.
Reply #11 from Stardock Forums Top
Halloween as pass and I coulnd't use my subscriber skin of Halloween from Wincustomize!!! Still wayting...